Variable Shade Adjustment DIN 9 – 13
Darkening Reaction Time < 1ms
Adjustable Headgear with Comfort Cushion
Conforms to ANSI & CE Standards
EN379 EN169 EN175
Shade Number on light state = DIN3# - DIN4#
Shade Number in Dark State = DIN9-13# (Stepless Regulation)
Response Time = < 1 ms ( Room Temperature
Return Time = 0.1 – 1s
Powe r Supply = Battery Powered with Solar Assist
Working Temperature = -50C (230F) + 550C (1310F)
View Area = 90 * 40 mm
UV Transmittance = 313nm <0.00006% - 365nm <0.000076%
IR Transmittance = 780-1300nm <0.003% - 1300-2000nm <0.009%
Weight = 1.07 LBS
About Welding Helmet:
These helmets are fully certified to ISO 9001.
Comply With The Standard Of ANSIZ87.1-2003.
Fully Certified By DIN CERTCO Of Germany To CE (EN379, En175)
Most welding applications requiring Up To DIN 13 Shade Protection.
This Includes MIG/MAG, TIG & MMA Welding.
Please refer to the Shade Guide Table.
Not Suitable For Welding Applications Requiring Higher Than DIN 13 Shade Protection.
This Welding Helmet Is Designed To Protect The Eyes And Face From Sparks, Spatter And Harmful Radiation Under Normal Welding Conditions. It Does Not Protect Against Explosive Devices Or Corrosive Liquids. Eye Protection Such As Spectacles Or Goggles Should Be Used Where Appropriate.
Failure To Follow The Operating Instructions And Maintain This Equipment In Good Working Condition, Will Reduce The Performance Of This Product And Could Lead To Permanent Eye Injury.
Specification And Performance Related Information For This Product May Be Changed Without Notice. As This Is Beyond Our Control, It Is Therefore The Obligation Of The User To Determine The Correct Selection And Safe Use Of This Product. Any Liability That May Occur As A Result Of The Use Or Failure Of This Product Is Limited To The Cost Of Repair Or Replacement Of The Failed Product.